Licensed Basement Finishing Contractors in the North Metro

Family-owned · Ham Lake Local

Licensed Basement Finishing Contractors in the North Metro

MN License #BC533891, full-scope basement remodeling from framing to final finish across Anoka County and beyond.

Call now(763) 331-2247

Call (763) 331-2247 Request an estimate

Free estimate

Tell us what you need

Three fields. It reaches a person here, not a call centre.

Full-Scope Basement Finishing Contractors

Most North Metro homes have an unfinished basement sitting below grade, unused. Powerbuilt Construction turns that square footage into livable, code-compliant space, framed, insulated, drywalled, and finished to permit. As licensed basement finishing contractors operating under MN License #BC533891, we pull permits, meet Minnesota energy and egress codes, and deliver a finished product that adds real value to the structure. A basement isn't the only underused space worth finishing, either; turning an attached garage into heated living space follows the same permitted, code-compliant path. If you're comparing contractors, that license number is verifiable through the Minnesota Department of Labor and Industry. Call Bob directly at (763) 331-2247 to talk scope.

Basement remodeling scope in Minnesota ranges from a basic stud-framed utility room to a full lower-level buildout with egress windows, a bathroom rough-in, a wet bar, and a home theater or bedroom suite. What drives the cost is total square footage, existing ceiling height, whether the slab needs drainage or a sump pit, and the finish level you're targeting. Concrete cutting for egress windows and drain tile work add meaningful cost. So does a full bathroom with tile and plumbing rough-in versus a half bath with a single fixture. Every job is different, contact Powerbuilt Construction for an accurate estimate. We've carried 4.9 stars across 27 Google reviews doing exactly this kind of work, and Bob runs each project directly. Not through a crew you've never met.

What Powerbuilt Includes in a Basement Finish

These are the structural and finish elements we scope, permit, and execute in-house.

Permit Pulling and Code Compliance

Every basement finish we complete goes through the local building department. We handle the permit application, schedule inspections, and ensure the framing, insulation, and egress meet Minnesota residential code. You shouldn't have to think about this part.

Framing and Insulation

Steel or wood stud framing against the foundation, continuous insulation to current Minnesota energy code. We account for beam pockets, mechanical clearances, and low-point ceiling obstructions before the first stud goes up.

Egress Window Installation

A bedroom below grade requires an egress window that meets Minnesota's minimum opening dimensions. We handle the concrete cutting, window well installation, and waterproofing at the penetration. This is not a shortcut-friendly detail.

Drywall, Tape, and Finish

We hang, tape, and finish drywall to a level that holds paint without telegraphing seams. Basement ceiling conditions and steel column wraps are handled in-scope, not billed as add-ons after the fact.

Bathroom Rough-In and Finish

Basement bathrooms require below-slab rough-in or an above-floor sewage ejector system. We coordinate the plumbing scope, handle the tile and fixture finish, and make sure it ties into the existing drain stack correctly.

Lighting, Trim, and Final Finish

Recessed lighting layout, door and window casing, baseboard trim, and paint-ready surfaces. The finish work is what separates a functional basement from one that looks like the contractor left before the job was done.

How a Basement Project Moves From Permit to Punchlist

01
Scope and Permit
We walk the basement with you, measure, note the mechanical constraints, and put together a scope. Then we pull the permit before any framing goes up. That sequence is non-negotiable on licensed work.
02
Rough-In and Inspections
Framing, insulation, any below-slab plumbing, egress windows if applicable. Each phase gets inspected before it's closed in. We schedule inspections. You don't have to track them.
03
Finish and Punchlist
Drywall, paint, trim, flooring, fixtures. We walk the finished space with you before we close the job. If something's not right, it gets corrected before we leave.

Local Coverage

Serving Anoka County and the Broader North Metro

permit pulling and code compliance work, professional service in Ham Lake, MN

Powerbuilt Construction operates throughout the North Metro Twin Cities, including Andover, Blaine, Coon Rapids, Lino Lakes, Ramsey, East Bethel, and the broader Anoka County corridor. If you're in the Oak Grove area or the Rum River communities to the north, we've worked that ground. We also cover Minneapolis and surrounding Hennepin County cities for the right project scope. For a full picture of where we work, see our home renovation coverage area. Bob holds MN General Contractor License #BC533891 and is reachable directly at (763) 331-2247, not through a call center.

What You Get With a Licensed General Contractor

Powerbuilt Construction is not a handyman operation or an unlicensed remodeler. These are the verifiable facts that separate us from most of what you'll find at the local level.

MN General Contractor License #BC533891: Verifiable through the Minnesota Department of Labor and Industry. We pull permits. We pass inspections.
Bob Powers runs the job directly: You call Bob, Bob shows up. There's no account rep taking your deposit and handing you off to a crew you've never met.
4.9 stars across 27 Google reviews: Reviewed by real clients on real projects, bathrooms, kitchens, structural work, and home additions across the region.
Residential and commercial licensed: Most remodelers work one side of that line. We're licensed for both, which means we've handled more varied structural and finish conditions than a residential-only shop.

Basement Remodeling Questions We Actually Hear

Do I need a permit to finish my basement in Minnesota?

Yes. Any basement finish that includes framing, electrical, plumbing, or egress work requires a building permit in Minnesota. The permit triggers inspections at rough-in and final, which is exactly how you confirm the work meets code. We pull the permit as part of our scope. It's not optional on any job we take.

What ceiling height is required for a finished basement in MN?

Minnesota Residential Code requires a minimum ceiling height of 7 feet in habitable spaces, with exceptions for beams and mechanical systems that can drop to 6 feet 8 inches. If your basement has a 6-foot-6 pour or lower, that's a real constraint we'll identify before quoting. Ceiling height directly affects whether a space can be permitted as a bedroom or living area.

What does egress mean and do I need it for a basement bedroom?

An egress window is a minimum-size opening that allows exit in an emergency. Minnesota code requires one in every basement sleeping room. The window well must also meet minimum dimensions. Cutting the foundation for egress involves concrete sawing, which adds cost and requires waterproofing at the opening. We handle the full installation, not just the window unit.

Can a basement bathroom be added without breaking the slab?

Sometimes. If the existing drain stack is located in the right position and the slab elevation allows it, an above-floor sewage ejector system can be installed without concrete cutting. More often, a properly draining below-grade bathroom requires a saw-cut trench for drain rough-in. We assess the existing plumbing location during the scope walk and give you the honest answer before any contract is signed.

What insulation is required for a finished basement in Minnesota?

Minnesota's energy code requires continuous insulation on basement walls in climate zone 6 (which covers the North Metro). The required R-value has increased over recent code cycles. Fiberglass batts alone in a stud cavity don't meet the current requirement without continuous rigid foam on the interior face of the foundation wall. We frame and insulate to current code. Not to whatever was standard a decade ago.

How long does a typical basement finish take?

A straightforward open-plan finish with one bathroom runs 6 to 10 weeks from permit approval to punchlist, depending on inspection scheduling and material lead times. Larger scopes with multiple rooms, custom tile, or egress window installation run longer. The permit process itself adds time at the front end. We'll give you a realistic schedule during the estimate, not a number designed to win the bid and missed by a month.

Start here

Get a Basement Estimate From Bob

Powerbuilt Construction handles the full scope: permit, framing, egress, finish work. Call Bob directly at (763) 331-2247 or use the form below to describe your project. We serve the entire North Metro Twin Cities area. See our completed work for examples of past projects.

(763) 331-2247

Mon: 08:00–18:00 Tue: 08:00–18:00 Wed: 08:00–18:00 Thu: 08:00–18:00 Fri: 08:00–14:30 Sun: Closed

Or send it in writing

Three fields, thirty seconds

Ready to Finish Your Basement?

Licensed. Permitted. Finished correctly the first time.

Call (763) 331-2247