Hours vary Ham Lake (763) 331-2247
Powerbuilt Construction Inc.
Licensed General Contractor for Building Homes in MinnesotaPowerbuilt Construction

Family-owned · Ham Lake Local

Licensed General Contractor for Building Homes in Minnesota

MN License #BC533891, full-scope new home construction across the North Metro Twin Cities.

Call now(763) 331-2247
Call (763) 331-2247Request an estimate

Free estimate

Tell us what you need

Three fields. It reaches a person here, not a call centre.

No obligation · Responds within 1 business day

By submitting this form you agree that we may contact you about your request and share your details with partner companies for marketing purposes.

Build a Home in MN the Right Way

Building a home in MN is one of the largest financial decisions you'll make, and who runs the job determines whether it goes right or sideways. Powerbuilt Construction holds MN General Contractor License #BC533891 and handles custom home building from site prep through final walkthrough, no middlemen, no handed-off scopes. Bob Powers runs the operation directly, which means you're talking to the decision-maker from the first call to the last nail. Call Bob at (763) 331-2247 to get your project started.

New home construction in Minnesota is not a one-size process. Site conditions, lot access, frost depth, local permitting, foundation type, framing scope, and finish level all move the cost and the timeline in real ways. A slab-on-grade build on a cleared lot is a different animal than a walkout-basement home on a graded hillside in Anoka County. Powerbuilt takes both, and pulls the permits on every job. We don't do work that skips the inspection process, because that's what protects you when you go to sell. Every job is different, contact Powerbuilt Construction for an accurate estimate.

What Powerbuilt Handles on a New Build

From breaking ground to handing over the keys, this is the scope we manage directly.

01

Site Preparation

Excavation coordination, grading, and lot clearing before the foundation goes in. Getting this wrong creates drainage and structural problems that show up years later.

02

Foundation and Framing

Full-basement, crawlspace, or slab foundations. Each built to MN frost-depth code. Framing is where the structure either holds or doesn't. We don't rush it.

03

Permit Pulling and Inspections

Every permit, every required inspection, handled under License #BC533891. If a contractor tells you a permit isn't necessary for new construction, walk away.

04

Trade Coordination

Electrical, plumbing, HVAC, and insulation are all scheduled and managed through the GC. Powerbuilt coordinates the sequence so work isn't done twice.

05

Interior Finish Work

Drywall, trim, cabinets, flooring, and fixtures, the finish details that determine whether a house actually feels like a home when you walk in.

06

Final Walkthrough and Punch List

We don't hand over keys with an open punch list. Everything gets addressed before the job closes. That's the standard, not an exception we make for good clients.

Why It Matters

A GC Who Answers the Phone

site preparation work, professional service in Ham Lake, MN
Most large Twin Cities builders route you through a sales rep, a project manager, and a customer service line, none of whom made the actual decisions about your house. Powerbuilt is structured differently. Bob Powers is the contractor, the scheduler, and the person you call when something needs an answer. That's not a sales pitch. It's just how this operation runs. Sixteen Google reviews averaging 4.9 stars back it up, real clients who dealt with the same person from start to finish. You won't find that at the volume builders operating across the metro. For residential construction where the owner wants direct accountability, the size of Powerbuilt is the point, not a limitation.

How a New Home Build Works with Powerbuilt

  1. 01

    Estimate and Planning

    Call Bob, walk through your lot, your plans, and your scope. We set a realistic budget and timeline before anything gets signed. No vague ballparks.

  2. 02

    Permitting and Construction

    Powerbuilt pulls the permits, coordinates trades, and manages the build schedule under License #BC533891. Inspections happen at every required stage.

  3. 03

    Finish and Final Inspection

    Interior finish work, punch list, final inspection sign-off, and keys. The job doesn't close until the code official and you both sign off.

The Powerbuilt Standard on Every Build

What you get when Powerbuilt runs the job.

MN License #BC533891
Verified, active general contractor license, not a handyman, not a subcontractor
Owner-run operation
Bob Powers coordinates the job directly from first call through final walkthrough
Permit-pulled construction
Every build goes through the proper inspection process, no shortcuts that cost you at resale
4.9 stars across 27 Google reviews
Real clients, real projects, verified on Google

Common Questions About Building a Home in MN

Is it cheaper to build or buy a house in Minnesota?
It depends entirely on the market, the lot, and what you're building. In the North Metro, buying an existing home means accepting whatever layout and condition it came in. Building gives you control over layout, finishes, and mechanical systems, but it takes longer and requires a licensed GC to manage trades and permitting. For homeowners who know what they want and don't want to compromise on it, building often makes more sense than spending years renovating a house that was never right to begin with.
What foundation types work for new homes in Anoka County, MN?
MN code requires footings set below the frost line, which runs 42 to 48 inches in Anoka County. Full basements, walkout basements, and crawlspace foundations are all used here depending on the lot grade and the homeowner's preference. Slab-on-grade is less common in Minnesota because of frost heave risk and the loss of below-grade storage and basement remodeling potential. Powerbuilt builds to the conditions of your specific site, not a generic plan.
How long does new home construction take in Minnesota?
A straightforward new build typically runs 9 to 14 months from permit approval to occupancy, depending on size, finish level, and how quickly trades are scheduled. Winter construction is normal in MN, framing, roofing, and mechanical rough-in all happen year-round. What slows projects down most is scope changes during construction and permit delays at the municipality. Getting the plan finalized before breaking ground saves weeks.
Do I need a general contractor to build a home in MN, or can I manage subcontractors myself?
Technically an owner-builder can manage their own construction in Minnesota, but the municipality will still require a licensed contractor to pull permits on most scopes. More practically: coordinating framers, electricians, plumbers, HVAC, insulation, and drywall crews across a nine-month schedule while managing inspections is a full-time job. The cost of mistakes in sequencing, materials, or code compliance typically exceeds the GC fee by a margin. Most people who try it once don't try it again.
What's included in Powerbuilt's scope on a new home build: and what do I need to source separately?
Powerbuilt manages the full construction scope: site prep, foundation, framing, roofing, exterior finish, trade coordination for electrical and plumbing, insulation, drywall, interior trim, cabinetry, and flooring. What you bring to the table is your lot, your finalized plans, and your material selections. Appliances are typically owner-purchased and set by the contractor. Landscaping is a separate scope. Call (763) 331-2247 and Bob will walk through exactly what your project covers.
Do I need a licensed general contractor to build a home in MN?
An owner-builder can manage their own construction in Minnesota, but municipalities still require a licensed contractor to pull permits on most scopes. Coordinating framers, electricians, plumbers, HVAC, insulation, and drywall crews across a nine-month schedule while managing inspections is a full-time job. The cost of sequencing and code mistakes typically exceeds the GC fee.
What's the difference between a custom home builder and a production builder in MN?
Production builders run the same floor plan in multiple communities with limited options for customization. A custom builder like Powerbuilt builds to your specific plans, on your specific lot, with finish selections you make. You're not picking from a menu of three countertop options. The tradeoff is that custom builds take longer to plan, but the result is a house designed around how you actually live.

Where We Build

New Home Construction Across the North Metro

Powerbuilt Construction builds new homes throughout Anoka County and the surrounding North Metro Twin Cities area. If your lot is in the communities below, Bob works there.

Ready to Build? Let's Talk.

Call Bob directly at (763) 331-2247 or use the contact form to send your project details. No sales team. No runaround. Just a licensed MN general contractor who'll tell you straight whether your timeline and budget are realistic.

Call (763) 331-2247 Call Bob: (763) 331-2247

Related